Skip to main content

Early 90's Olmo Sintex-SOLD

Well I decided to downsize and sold the Olmo today. It went to a nice guy who appreciates steel frame bikes from Philly via the low country of SC. He made a trip to Charlotte just to pick it up, so it was nice to talk about bikes and look at what I have left. 

---

I found a great looking OLMO Sintex frame, evidently from the early 90's. I haven't found any catalogue cuts but narrowed down the pantographed signatures on the seat stays, BB and fork lugs to the early 90's. Regardless, its a wonderful iridescent turquoise with a pearl sheen to the point. This 56cm frame is made from Columbus SLX steel. Ive built it up with the random parts from the Tommasini America and went with white tires and bar tape(which I quickly changed from the blue in these pics.


 






A few pics from when I unbolted it. The wheels were an extra set I had laying around. Looks like the BB has the frame size stamped as well as what must be a serial number 61C?





The previous owner replaced the head badge decal and the SLX decal.















Popular posts from this blog

1990 Basso Loto

UPDATE: Already switched up a few things. Swapped the threadless stem with black Cinelli bars, 1R stem and seatpost. Keeps the black and white theme going well I think. Much more comfortable with a little height on the bars.  Score! I finally found a Basso Fior di Loto. I've been searching for this color variant and model for a while now and this one popped up on Ebay from Brownsville Texas. Super excited to build this up with the Campagnolo parts from the Pegoretti upgrade that's in the works.  From what I have gathered so far, this frame is most likely from  1990. Its a  55cm  Columbus SLX steel frame and fork,  Basso Fior di Loto model in the Caribe colorway. It has a few fandom stickers on it that removed fairly easily and with a little elbow grease. The paint polished up nicely afterward and there are only a few nicks and scratches.  This 1990 Catalogue cut shows the color variants available for this...

1989 Pinarello Treviso

I was able to find a new frame update for my collection, this installment is a 1989 Pinarello Treviso, Cobalto Smoke, 56cm frame. It was in decent shape when I purchased it locally off a bike forum member in SC. It has some ugly stickers on the top tube (subsequently removed) and a paint scheme that can only be described as.... classic 80's italian. An odd "smoked" blue, thusly named Cobalto Smoke, from the catalog. Here are some pics from the forum post. The paint was pretty dull and very fragile.  One of the first tasks completed was to remove the unwanted stickers and try to rehab the paint. I tested a few paint options, using thinned testors model paint, and found a near match for the base blue. My brush technique wasn't great but it worked well for small scratch marks. Added a duple-color clear coat after a thorough polishing. Turned out well and should be better protected. Next up was to replace the decals, which were long gone, but g...

1984 Bianchi Nuovo Racing

Finally got sick of the Origin8 tiki mustache bars, so I decided on a change. I really dislike them. Only one comfortable position, out on the ends. Went back to one of my favorite configurations for this build. Bullhorn bars with Suntour bar end shifters. Even broke out some left over celeste bar tape and the old celeste Selle San Marco Ponza saddle from the 2008 Bianchi.   The first changes came quickly as usual. I ran into some trouble putting 700x32c tires on the Mavic rims with 700C wheels. Surprisingly not enough frame clearance for the rear brake bridge. So,  decided to swap the 650b Wheelsmith wheelset with Weinmann Zac19 rims from the Gios and install some SKS Bluemels mudguards. Wiped it down with Gibbs Oil so we'll see how long it keeps clear of rust. Just recently added a set of Suntour barcons and will give that a try for a while.  Below are the pics of the first build.  Its missing one of the toptube cable braze-on guide...