Skip to main content

1985 Gios Professional...SOLD

This one is authentic...and Gios Blue! It's a 57cm 1985 Gios Professional, Columbus SL frame with serial number 503169. As I noted in the previous Gios post, this frame has all the tell tale details that make it authentic. Gios stamped on the fork, bottom bracket and seatstays. Now that I compare the two I can see the subtle differences. Those details coupled with the correspondence with Marco Gios from Gios-Torino confirmed it's legit. In retrospect a way better deal than the first frame, even it had been not a fake.

The current build is a Campagnolo Daytona group (precursor to Centaur), 3T stem, Cinelli bars and Brooks B17 Narrow saddle, with the addition of a new used wheelset: Velocity Fusion rims laced to Campagnolo Centaur hubs.  Its a great ride! Will likely change the 25c  Gatorskins with a set of 28C Vittoria Randonneur tires to make it pretty bombproof around town. 



The pics below are of the second build where I swapped the 650b wheelset with the 1984 Bianchi so I could take advantage of the fender eyelets on that frame for mudguards on that frame. So, this iteration has the Campagnolo daytona brakes back with its its group and the old set of Campagnolo Scirocco G3 wheels. Must say, it rode pretty nicely now with a light wheelset.  



This is the build with the 650b wheels. 
Not a bad ride but just didnt look right. 






















Popular posts from this blog

1990 Basso Loto

UPDATE: Already switched up a few things. Swapped the threadless stem with black Cinelli bars, 1R stem and seatpost. Keeps the black and white theme going well I think. Much more comfortable with a little height on the bars.  Score! I finally found a Basso Fior di Loto. I've been searching for this color variant and model for a while now and this one popped up on Ebay from Brownsville Texas. Super excited to build this up with the Campagnolo parts from the Pegoretti upgrade that's in the works.  From what I have gathered so far, this frame is most likely from  1990. Its a  55cm  Columbus SLX steel frame and fork,  Basso Fior di Loto model in the Caribe colorway. It has a few fandom stickers on it that removed fairly easily and with a little elbow grease. The paint polished up nicely afterward and there are only a few nicks and scratches.  This 1990 Catalogue cut shows the color variants available for this...

1989 Pinarello Treviso

I was able to find a new frame update for my collection, this installment is a 1989 Pinarello Treviso, Cobalto Smoke, 56cm frame. It was in decent shape when I purchased it locally off a bike forum member in SC. It has some ugly stickers on the top tube (subsequently removed) and a paint scheme that can only be described as.... classic 80's italian. An odd "smoked" blue, thusly named Cobalto Smoke, from the catalog. Here are some pics from the forum post. The paint was pretty dull and very fragile.  One of the first tasks completed was to remove the unwanted stickers and try to rehab the paint. I tested a few paint options, using thinned testors model paint, and found a near match for the base blue. My brush technique wasn't great but it worked well for small scratch marks. Added a duple-color clear coat after a thorough polishing. Turned out well and should be better protected. Next up was to replace the decals, which were long gone, but g...

1984 Bianchi Nuovo Racing

Finally got sick of the Origin8 tiki mustache bars, so I decided on a change. I really dislike them. Only one comfortable position, out on the ends. Went back to one of my favorite configurations for this build. Bullhorn bars with Suntour bar end shifters. Even broke out some left over celeste bar tape and the old celeste Selle San Marco Ponza saddle from the 2008 Bianchi.   The first changes came quickly as usual. I ran into some trouble putting 700x32c tires on the Mavic rims with 700C wheels. Surprisingly not enough frame clearance for the rear brake bridge. So,  decided to swap the 650b Wheelsmith wheelset with Weinmann Zac19 rims from the Gios and install some SKS Bluemels mudguards. Wiped it down with Gibbs Oil so we'll see how long it keeps clear of rust. Just recently added a set of Suntour barcons and will give that a try for a while.  Below are the pics of the first build.  Its missing one of the toptube cable braze-on guide...